26072 Merit Circle #110 / Laguna Hills, CA 92653 / 949-916-0945 / Fax 949-458-8502
eControls
Copyright 2017
econtrols_20-06-29006011.jpg
TYPICAL INSTALLATION
The Comfort Problem
In two-story homes, during the cooling season, the upstairs is too hot and during the heating season, the downstairs is too cold.
How the C365RC Solves The Problem
Airflow can be increased to the upstairs or downstairs by as much as 60%. The dampers never fully close and the airflow through the equipment remains unchanged.
Eliminates installing bypass duct and damper or setting the closed position on non-calling zone dampers.
Eliminates Bypass
No new wiring in the living space of the home. Thermostat uses the existing thermostat cable. The wireless sensor mounts on a wall using easy release adhesive and is pre-linked to the thermostat.
Quick Installation
Automatically directs more conditioned airflow to the area that needs it for a uniformly comfortable home in all seasons. Or, the homeowner can manually direct more airflow to the area desired.
Provides a Comfortable Home
Automatically directs more conditioned airflow upstairs at night and less to the unoccupied downstairs area saving 30% in energy.
30% Energy Savings at Night
Solves the "My upstairs is too hot!" problem
FEATURES
econtrols_20-06-29006009.jpg
Model R80CJXX
Round Damper, Modulating. Plug&Play connection. XX diameter from 6 to 20 inches.
Model C365RC22KWF
C365RC22WF Programmable WiFi thermostat with airflow control for 2 zones, a PCB22 Power Board and a TS6 Wireless Temperature Sensor (prelinked to thermostat). Use with GE or HP equipment with 2H/2C. Includes WiFi App.
ORDERING INFORMATION
Model C365RC
Simple, low-cost wireless alternative to zoning. Provides the same comfort as
zoning at HALF the cost. Controls temperature and airflow. For Aftermarket.
The C365RC thermostat monitors the downstairs and upstairs temperatures. If there is a difference in temperatures, the thermostat will automatically direct more conditioned airflow to the space that needs it. When airflow is increased upstairs, the upstairs damper remains fully open while the downstairs damper partially closes, forcing more airflow upstairs. When airflow is increased downstairs, the downstairs damper remains fully open while the upstairs damper partially closes, forcing more airflow downstairs.
C365RC Thermostat
Installed Downstairs
PB22 Power Board
Installed near equipment.
Modulating Plug&Play Damper Controls Upstairs  Airflow.
Modulating Plug&Play Damper Controls Downstairs  Airflow.
Plug&Play Cables Included
To equipment terminals.
Up to four dampers can be connected to define a zone
TS6 Wireless Temperature Sensor Installed Upstairs
Existing Tstat Cable
5-7 Wire Tstat Cable
WiFi thermostat provides remote access from anywhere. Plugs onto the same subbase for easy upgrade - no additional wiring.
A Connected Home
Dampers connect to the power board using a plug&play cable provided for easy, error-free connection.
Plug&Play Damper Installation
RESOURCES
Videos
Manuals
Brochure
About Us
Contact Us
Home
Low Cost Airflow (2-Zone) Controls
Whole House Fan Controls
Residential and Light Commercial Zoning
Products
Coming Soon
Coming Soon
Comfort365 and ProZone Zoning
Whole House Fan Controls
Where To Buy