26072 Merit Circle #110 / Laguna Hills, CA 92653 / 949-916-0945 / Fax 949-458-8502
eControls
Copyright 2017
econtrols_20-08-20012020.jpg econtrols_20-08-20012018.jpg
Model TS3
Outdoor Temperature Sensor. Uses 2-wire connection to RM3.
Model RT3
Used when plug&play Fan Control is already installed on the fan.
ORDERING INFORMATION
Model RT3
Wireless Remote Control with Temperature, Timer and Speed Control
The FC3J fan control is wired and installed in the junction box on the fan. The RM3 radio module connects to the FC3J using a plug&play cable provided. The number of fan speeds is set using the RT3 remote and can be digitally displayed. The RT3 remote and RM3 radio module are prelinked and ready to go for a quick and simple installation.
Quick and Simple Installation
RT3 installation advantage over the competition:
The RT3 features a motion activated digital display that when picked up, displays the indoor temperature, comfort temperature, time remaining, fan speed and fan status.
Motion  Activated Digital Display
Eliminates removing junction box from the fan, installing a wiring hub on the fan and rerouting wires into the wiring hub.
Eliminates setting the number of fan speeds using dip switches.
Eliminates linking remote to wiring hub.
The RT3 can be used anywhere in the home - downstairs in the early evening or set it on a bedside table at bedtime.
Wireless Control Anywhere in the Home
FEATURES
Homeowners can use the built-in 1 to 12 hour timer. Or, use temperature control to improve comfort and energy efficiency. In temperature control, the fan cools the home to the comfort temperature set, just like a home's thermostat. Overcooling and running the fan longer than needed are eliminated. The homeowner no longer has to get up at night to turn the timer off because it's too cold or extend the timer because the fan turned off too soon.
Temperature or Timer Control 
One concern with temperature control is that the following morning, the homeowner will forget the fan is on and close up windows. The built-in safety timer will automatically turn the fan off the following morning just in case the homeowner forgets. 
Built-In Safety Features
FC3J Fan Control is wired and installed in the junction box on the fan. Depending on the fan manufacturer, the fan may be supplied with the FC3J already installed - eliminating ALL wiring. The RM3 radio module connects to the fan control using a plug&play cable provided.
Simple Installation
An optional outdoor temperature sensor can be installed and delays whole house fan operation if the outdoor temperature is
Outdoor Temperature Sensor
FC3J Fan Control
Wired and installed in fan junction box.
RM3
Radio Module
RT3
Wireless Remote
too warm to provide cooling. The outdoor temperature limit can be changed by the homeowner.
Plug&Play Cable Included
Includes RT3 Wireless Remote Control and RM3 Radio Module.
$129
Available on Amazon
or Contact eControls
$24
Available on Amazon
or Contact eControls
$90
Contact eControls
Uses a low voltage, 2-wire connection to the RM3 radio module.
Wireless
TYPICAL INSTALLATION
RESOURCES
Videos
RT3 Remote Control
All Fan Controls
Brochure
User Manual
Installation Manual
About Us
Contact Us
Home
Low Cost Airflow (2-Zone) Controls
Whole House Fan Controls
Residential and Light Commercial Zoning
Products
Comfort365 and ProZone Zoning
Whole House Fan Controls
Where To Buy
Comfort365 Airflow Controls
Whole House Fan Controls
ProZone Zoning
Homeowner Resources